|
|
|
|
| SC235.9抓钢机 |
|
| 机 型 | Type |
| SC235.9抓钢机（康明斯+中润液压件+0.6方360度旋转梅花抓） |
| 工作质量（T） | Working mass | T | 23.5 |
| 梅花抓容量(m3) | Bucket capacity(SAE) | m3 | 360度液压旋转梅花抓0.6方 |
| 发动机型号 | Engine model |
| 康明斯QSB7 |
| 功率(kw/r/min) | Power | kw/r/min | 135/2050 |
| 燃油箱容积(L) | Volume of fuel tank | L | 350 |
| 行走速度(高/低）(km/h) | Travel speed (High/Low) | km/h | 5.8/3.2 |
| 回转速度(r/min) | Swing speed | r/min | 10.7 |
| 爬坡能力(°) | Gradeability | ° | 35 |
| 铲斗挖掘力(KN) ISO | Digging force of bucket | KN |
|
| 斗杆挖掘力(KN) ISO | Digging force of stick | KN |
|
| 最大起吊力（T） |
| T |
|
| 接地比压(KPa) | Specific pressure of ground contact | Kpa | 45.3 |
| 牵引力（kN) |
| kN | 220 |
| 液压泵型号 | Type of hydraulic pump |
| AP4VO140 |
| 最大流量（L/min) | Maximum flow | L/min | 226*2 |
| 工作压力(MPa) | Working pressure | Mpa | 34.3 |
| 液压油箱容积(L) | Volume of hydraulic fluid tank | L | 230 |
| A-总长(mm) | A-Overall length | mm | 9889 |
| B-总宽(mm) | B-Overall Width | mm | 2780 |
| C-总高(动臂顶)(mm) | C-Overall height(tope of boom) | mm | 2530 |
| D-总高(驾驶顶)(mm) | D-Overall height(tope of cab) | mm | 3120 |
| E-配重离地间隙(mm) | E-Gap from counterweight to ground | mm | 1048 |
| F-最小离地间隙(mm) | F-Min ground clearance | mm | 468 |
| G-尾部回转半径(mm) | G-Tail swing radius | mm | 2870 |
| H-履带接地长度(mm) | H-Length of track on ground | mm | 3445 |
| J-履带长度(mm) | J-Track length | mm | 4260 |
| K-轨距(mm) | K-Gauge | mm | 2380 |
| L-履带宽度(mm) | L-Width of track | mm | 2980 |
| M-履带板宽度(mm) | M-Width of track shoe | mm | 600 |
| N-转台宽度(mm) | N-Width of turning table | mm | 2700 |
| O-最大作业高度(mm) | O-Max. digging height | mm | 10475（梅花抓下部） |
| P-最大卸载高度(mm) | P-Max. dumping height | mm |
|
| Q-最大作业深度(mm) | Q-Max. digging depth | mm | 5887（梅花抓下部） |
| R-最大垂直壁挖掘深度(mm) | R-Max. vertical wall digging depth | mm |
|
| S-挖出2.5m水平面时的最大挖掘深度(mm) | Max. digging depth at 2.5m plane | mm |
|
| T-最大作业距离 | T-Max. digging distance | mm | 11316（梅花抓最外端） |
| U-在地平面的最大挖掘距离(mm) | U-Max. digging distance at plane | mm |
|
| V-最小回转半径(mm) | Min. swing radius | mm | 3316 |
| W-最小回转半径时最大高度(mm) | Max height at min swing radius | mm | 8707 |
| X-回转中心至后端部的距离(mm) | Distance from center of swing to rear end | mm | 2960 |
| Y-履带齿厚度(mm) | Y-Thickness of track grouses | mm | 26 |
| Z-配重高度(mm) |
| mm | 2120 |
| A1-接地长度(运输时)(mm) |
| mm | 4604 |
| A2-推土铲宽度(mm) |
| mm |
|
| 斗杆长度(mm) | Length of stick | mm | 3500 |
| 动臂长度(mm) | Length of boom | mm | 6800 |
| A3-推土铲最大抬起高度（mm) |
| mm |
|
| A4-推土铲最大铲深度（mm) |
| mm |
|
| 最大浮力（T) |
| T |
|
| 主浮箱高度 |
| mm |
|
| 侧浮箱高度 |
|
|
|
| 转向角(°) |
| ° |
|
